The Low Pressure Switching (LPS) Monitor was engineered for monitoring low differential pressures in various process applications. The switching function allows for independent high and low pressure alarms to be adjusted from the front panel. The digital LED display clearly indicates the process pressure and front panel status lights indicate the condition of the alarm state by showing green when in limits and red when an alarm limit is exceeded. The time delay circuit allows customization of the unit response to prevent intermittent tripping due to transient pressure fluctuations.
Features
- Small 1/16 DIN panel mount size
- LED display of process pressure
- LED status of alarm states
- Optional Analog Output
- Isolated High/Low alarm contacts
- Optional Compound gage function
- Adjustable time delay eliminates nuisance trips
- Removable terminal block
- 100% Analog Design
Specifications *
| Medium | Clean Dry Air, Inert Gases |
| Type | Field Adjustable |
| Range | 0 to 0.2″, 0.5″, 1″, 2″, 5″ 10″, 20″& 80″ WC 0 to 50, 100, 200, 500, 1000, 2000, 10000& 20000Pa |
| Proof Pressure | ± 14.5 psig ³ 1″ WC ± 80″ < 1″ WC |
| Burst Pressure | 20 psig |
| Switching Response | 1 Sec. to 30 Sec. |
| Switching Output | 1A @ 30 VDC |
| Switch Point | Field Adjustable |
| Input Power | 12 to 24 VDC |
| Analog Output option | 4 – 20 mA, 0-10 VDC |
| Operating Temp. Range | 0° to 40°C |
| Display Accuracy | 1% F.S., 0° to 40°C |
| Min. Operating Life | 5 Million cycles |
| Approvals | UL, CE |
| Warranty | 36 Months |
| Media Connections | 1/4″ tubing (push to seal) Barbed hose fitting |
